Target Support Packages
To operate the RT Box, PLECS Standalone or PLECS Blockset and the PLECS Coder are required on a host computer. In addition, a Target Support Package (see table below) must be installed on the host. Download the appropriate package file and follow the install instructions.
Platform | File name |
---|---|
Microsoft Windows 64-bit | PLECS_RT_Box_3.0.6_win.zip (210552349 bytes) |
Mac / Intel 64-bit, Arm 64-bit | PLECS_RT_Box_3.0.6_mac.zip (230895756 bytes) |
Linux / Intel 64-bit | PLECS_RT_Box_3.0.6_linux.zip (227515010 bytes) |
This target support package requires PLECS version 4.8.1 or newer.
Release History
Version 3.0
- Support for accelerated FPGA simulation on RT Box 2/3
- New Digital Out Override block
- File rotation in To File block
- Support for interpolation in Resolver Out block
Version 2.3
- Support for RT Box CE Rev. 1.3
- EnDat Slave (for RT Box 2/3 HW revision 1.3 and newer)
Version 2.2
- To File block (for RT Box 1/CE)
- Powerstage Protection
- Asynchronous SPI Slave
- Ethercat Slave (for RT Box 2/3 HW revision 1.2 and newer)
- XCP (for RT Box 2/3)
Version 2.1
- Wall Clock block
- To File block (for RT Box 2/3)
- Asynchronous SPI Master
- Preemptive multitasking for RT Box 1
Version 2.0
- Support for RT Box 2 and 3
- Updated compiler
Version 1.8
- CAN Pack and Unpack blocks
- Support for RT Box 1 Rev. 1.2
Version 1.7
- Support for CAN
- Support for UDP
Version 1.6
- Fixes for Quadrature Encoder and SPI Master
Version 1.5
- Support for Quadrature Encoder Counter
Version 1.4
- Support for SPI
- Support for XML-RPC
Version 1.3
- Support for PWM synchronization and
- Support for variable ADC sampling delay
Version 1.2
- Support for SFP communication
Version 1.1
- Initial RT Box firmware